Effect of heparin on high glucose induced proliferation and expression of matrix metalloproteinases in normal human mesangial cells

Background The pathogenesis of diabetic nephropathy (DN) is a complex pathophysiological process. Its precise mechanism is not fully known. In recent years it has been recognized that synthesis of various extracelluar matrix (ECM) components may increase, and that degradation of ECM may decrease in DN. It was reported heparin could inhibit mesangial cells proliferation in vitro. The main aim of this study is to explore whether heparin inhibits proliferation of mesangial cells grown in high glucose concentration and to measure the effect of heparin on matrix metalloproteinases (MMPs) expression in mesangial cells. Methods The medium contained either low glucose (5 mmol/L) or high glucose (25 mmol/L). The concentrations of heparin in the culture medium were 0, 25, 50, 100, 200 or 400 μg/mL. A metabolic (WST-1) assay was used to measure mesangial cell proliferation and Western blot analysis was used to measure MMPs expression of mesangial cells. Results Normal human mesangial cell (NHMC) proliferation was higher in high glucose (HG) medium than in low glucose (LG) medium. They showed a 1.93 fold expansion after 72 h in high glucose in contrast to a 1.63 fold expansion in low glucose. In the presence of heparin, mesangial cells proliferation was inhibited, which was more obvious at high glucose concentrations than at low glucose concentrations. In high glucose, with heparin concentration of 50, 100, 200 and 400 μg/mL, the mesangial cells showed a 0.61 fold, 0.52 fold, 0.52 fold and 0.41 fold reductions in cell number compared to cells grown without heparin. In low glucose, only concentrations of 200 μg/mL and 400 μg/mL showed reduction in cell number, namely 0.54 fold and 0.45 fold, when compared to cells grown without heparin. In Western blot analysis, MMP₁, MMP₂, MMP₃ and MMP₉ was expressed by mesangial cells expressed in both high and low glucose concentrations, which was more prominent in high glucose medium. Incubation of heparin further increased expression of MMP₁, MMP₂, MMP₃ and MMP₉. Conclusions This study suggests that glucose can accelerate mesangial cell proliferation while heparin can reduce proliferation, being more obvious at high glucose concentrations. Higher glucose concentrations led to increased MMP expression, which may take part in the regulation of mesangial matrix synthesis and degradation. Addition of heparin resulted in a corresponding increase in MMP expression, most notably at high glucose concentrations, indicating a potentially renoprotective role in DN. Foundation item: Project (30370663) supported by the National Natural Science Foundation of China     

A novel chromatographic separation technique using tertiary pyridine resin for the partitioning of trivalent actinides and lanthanides

A novel chromatographic separation technique using a tertiary pyridine type resin has been applied to the partitioning of the trivalent actinides (An) and lanthanides (Ln) and several successful results have been shown. In an alcoholic hydrochloric acid system, the trivalent An were clearly separated from the Ln, while no such group separation was achieved in an alcoholic nitric acid system. On the other hand, the nitric acid system was more effective for the intragroup (i.e. individual) separation of the trivalent An and the Ln than the hydrochloric acid system. On the basis of these results, a novel concept for the partitioning of the trivalent An and Ln using the present separation technique and its flowchart have been proposed with its advantages and disadvantages.     

Development of specimen and test method for strength analysis of MEMS micromirror

Specimens and fracture test methods for strength analysis of MEMS micromirrors were proposed. Bending and combined loading tests were performed, and torsion strength was estimated from those results. Two-parameter Weibull distribution was used to evaluate the fracture stresses estimated from the FEM model. The resulting scale and shape parameters were 787 MPa and 7.77 for the bending test and 517 MPa and 5.28 for the combined loading test. There was a difference in strength between the results of the bending and combined loading tests. From the load factor analysis, it was found that both geometry and stress distribution have to be considered to estimate the strength of MEMS since flaws are non-uniformly distributed. It was also found that torsional strength can be estimated on the safe side using the results of the combined loading test.     

ISS experiments for the clarification of boiling and two-phase flow in microgravity and for the development of high-performance space cold plates

Inflow boiling, gravity effects on the distribution of both phases are observed in a heated tube and heat transfer coefficients due to two-phase forced convection is deteriorated in microgravity. In narrow channels between heated and unheated plates, the increase in subcooling enlarges a size of flattened bubble and reduces the frequency of detachment under microgravity conditions resulting the emphasis of heat transfer deterioration. To clarify reasons for the unknown behaviors of interfacial distribution and corresponding characteristics in heat transfer not easily be clarified through the experiments on ground, the opportunity on the experiments utilizing long-term microgravity duration realized in ISS is required. The experiments on microgravity boiling and two-phase flow are proposed by the collaboration of researchers in five countries. A common test loop is designed to conduct multiple experiments by the interchangeable structures of test sections; a transparent heated tube for the visualized flow boiling, a stainless tube for the measurement of CHF data, a copper surface for the heat transfer data of nucleate boiling with superimposed liquid flows in a duct, a glass heated plate with multiple array of small temperature sensors and transparent heaters for the clarification of mechanisms in nucleate boiling heat transfer, and one or two models of cold plates for practical applications. A direction of researches in the present discipline is proposed based on the existing experimental results and on the idea developed by the present authors.     

Quantum Lattice-Gas Automata Simulation of Electronic Wave Propagation in Nanostructures

We report the two- and three-dimensional quantum lattice-gas automata simulation for one-particle electronic wave propagation in nanostructures. The transmission coefficient of the electronic wave through the two-dimensional quantum point contact is investigated taking account of the surface roughness of the confinement wall. It is demonstrated that the electron transmission is significantly affected by the surface roughness pattern even if the same roughness parameter is assumed. We also perform the three-dimensional simulation, and the wave propagation in the structure like an ultrathin-body MOSFET is visualized.     

Mass recovery adsorption refrigeration cycle—improving cooling capacity

The study investigates the performance of two-bed, silica gel-water adsorption refrigeration cycle with mass recovery process. The cycle with mass recovery can be driven by the relatively low temperature heat source. In an adsorption refrigeration cycle, the pressures in adsorber and desorber are different. The chiller with mass recovery process utilizes the pressure difference to enhance the refrigerant mass circulation. Cooling capacity and coefficient of performance (COP) were calculated by cycle simulation computer program to analyze the influences of operating conditions. The mass recovery cycle was compared with conventional cycle such as the single stage adsorption cycle in terms of cooling capacity and COP. The results show that the cooling capacity of mass recovery cycle is superior to that of conventional cycle and the mass recovery process is more effective for low regenerating temperature.     

Measurements of gamma-ray emission probabilities of 241, 243Am and 239Np

Gamma-ray emission probabilities of ^{241, 243}Am and ²³⁹Np have been precisely measured with gamma- and alpha-ray spectroscopic methods. The activities of the samples were determined by measuring alpha particles using a Si semiconductor detector. Gamma rays emitted from the samples were measured with a planar type High-Purity Germanium (HPGe) detector. An efficiency curve of the HPGe detector was derived with uncertainties from 0.7% to 2.5% by combining measured efficiencies and Monte Carlo simulation. The gamma-ray emission probabilities for the major gamma rays of these nuclides were determined with uncertainties less than 1.2%.     

Experimental study of neutron counting in a zero-power reactor driven by a neutron source inherent in highly enriched uranium fuels

Even a zero-power reactor core containing highly enriched uranium has a weak neutron source inherent in uranium 235, and consequently, a neutron counter placed closely to the core without external neutron source registers a certain counting rate. The study of the counting is very important for zero-power reactor physics experiments with a high precision. In this experimental study, first, at a shutdown state of the UTR-Kinki reactor without start-up neutron source, a pulse height distribution of output signals from a neutron proportional counter was measured to confirm that these signals resulted from neutron detections. At several subcritical states of the UTR, then, the Feynman-α analysis was carried out to confirm that the neutrons detected by the counter must be fission neutrons multiplied by fission chain reactions. The correlation amplitude measured in the Feynman-α analysis was much higher than that measured in a previous drive by start-up source. Further, it was also confirmed that the subcriticality dependence of neutron counting rate followed the source multiplication formula. This feature indicated that the one-point model was very successful in the subcritical range including the shutdown state.